Setup Grid Dialog
This dialog is accessed from either of the following
locations when routing duct bank:
- Click the Setup Conduit Layout only option from the Duct bank configuration section of the Duct Bank Routing Tool - When access in this mode, it defines the number of conduit slots to be included in the duct bank.
- Click the Setup grid option from the Spacer Configuration section of the Spacer Configuration Tool - When accessed in this mode, it defined the spacer layout (which supports the conduit) for the duct bank to be routed.
| Setting | Description |
|---|---|
| Rows | Define the number of rows to be included in the layout grid. |
| Columns | Define the number of columns to be included in the layout grid. |
| Space (Vert/Hor)/(Conduit ONLY) | These fields are used to define the spacing between the conduit when spacers are not used. When using spacers, the spacer size define the vertical and horizontal spacing. |
| Starting row designator | This value (along with the Starting column designator) is used as a start point when identifying the duct bank cells. Cells in a grid are usually identified using the row/column values such as (1,A), or something similar. |
| Starting column designator | This value (along with the Starting column designator) is used as a start point when identifying the duct bank cells. |
| Exclude column designators | Columns are designated using alphabet characters. To exclude any of these any characters from being used as designators, enter them in this field. |
| OK | Save the changes and close the dialog. |
| Cancel | Close the dialog without saving the changes. |